Fig. 3.15 Dismounting Of Paper Feeding Motor Assy - Epson MX-80 Technical Manual

For paper feeding motor
For timing belt motor
Bundle of lead wires
for timing belt motor
Fig. 3.14 Unsoldering of Lead Wire$
Lead wires for
PTS sensor
6 o Yellow
o Black
o White
o Red
o Green
1 o Green
(6) Dismounting of paper feeding motor assembly
Dismount the paper feeding motor assembly as follows. uoo
S STEP 1. Dismount the M-3210 printer mechanism in accordance with paragraph 3.3 (1)
above. • »
STEP 2. untie the wire band securing the bundle of lead wires supplying signals to the
paper feeding motor. , x,. *
STEP 3. Unsolder the six lead wires for the paper feeding motor from the termina
board. (See Fig. 3.14.)
STEP 4. Remove the two cup screws (M2.5X4) securing the paper feeding motor as
sembly. (See Fig. 3.15.)
Paper feeding motor assy
>
CS (M2.5X4)
Fig. 3.15 Dismounting of Paper Feeding Motor Assy
3-13
REV. A