Figure; Step - ParaBody 893104 Assembly Instructions Manual

FIGURE 12

17
18

STEP 12:

• Route the end of the second CABLE (18) through the slot of the UPRIGHT FRAME (2) then SECURELY assemble one 4-1/2"
PULLEY (17) to the UPRIGHT FRAME (2) using two 3/8 X 2-3/4" BOLTS (32), two 3/8" FLANGE SPACERS (39), two 3/8" WASH-
ERS (40), and two 3/8" LOCK NUTS (42). (NOTE: The CABLE (18) should be routed between the pulley and the retaining bolt as
shown in FIGURE 12.)
FIGURE 13
STEP 13:
• Wrap the CABLE (18) around one 3-1/2" PULLEY (16) and LOOSELY assemble it to the 3/16 X 1-3/4 X 5-1/4" PLATES (28) using one
3/8 X 2" BOLT (31), two 3/8" WASHERS (40), and one 3/8" LOCK NUT (42). See FIGURE 13.
2
42
40
42
16
18
11
39
32 3/8 X 2-3/4"
28
40
31 3/8 X 2"