Step - ParaBody 893104 Assembly Instructions Manual

FIGURE 11

STEP 11:

• Attach the CABLE (18) from the TOP BOOM (1) to the CARRIAGE (13) using one 1/4" QUICK LINK (48) as shown in FIGURE 11.
(IMPORTANT! Securely tighten QUICK LINK.)
• Place one 3-1/2" PULLEY (16) into the loop of the CABLE (18) below the second and third PULLEY of the TOP BOOM (1) as shown
in FIGURE 11.
• LOOSELY assemble two 3/16 X 1-3/4 X 5-1/4" PLATES (28) to each side of the 3-1/2" PULLEY (16) using one 3/8 X 2" BOLT (31),
two 3/8" WASHERS (40), and one 3/8" LOCK NUT (42). See FIGURE 11.
1/2
0
1/2 1/2
1 2
1
42
16
28
1/2
3 4
10
40
18
!IMPORTANT!
48
13
1/2 1/2
5
31 3/8 X 2"
SECURELY
TIGHTEN
6