Standard Features - HP ProLiant ML10 v2 Quickspecs

QuickSpecs

Standard Features

Processor
One of the following
depending on model
Cache Memory
One of the following
depending on model
Chipset
Upgradeability
On System Management
Processor
Memory Protection
Memory
One of the following
depending on model
Network Controller
Expansion Slots
Entry Processors
NOTE: All support up to 1333MT/s DDR3 memory speeds.
Intel® Pentium® G3240 (3.1GHz/2-core/3MB/54W)
Base Processors
NOTE: All support up to 1600MT/s DDR3 memory speeds.
Intel® CoreTM i3-4150 (3.5GHz/2-core/3MB/54W, HT)
Performance Processors
NOTE: All support up to 1600MT/s DDR3 memory speeds.
Intel® Xeon® E3-1220v3 (3.1GHz/4-core/8MB/80W)
8MB (1 x 8MB) L3 Cache
NOTE: For Quad-core Xeon processors.
3MB (1 x 3MB) L3 Cache
NOTE: For Dual-core Pentium® CoreTM i3 processors.
Intel® C222 Chipset
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
Upgradeable to 4 cores
NOTE: Total 2 or 4 cores
Up to 4 DIMM slots available for higher memory capacity
Up to 4 LFF Hard Drive Bays
1 x8 and 1 x16 PCIe 3.0 and 1 x8 and 1x4 PCIe 2.0 I/O slots for additional communications and storage
expansion
Optical Drive Bay (up to 2)
HP iLO (Firmware: HP iLO4)
NOTE: For more information, visit:
ECC
Type
DIMM Slots Available
Maximum Capacity
(UDIMM)
NOTE: HP memory from previous generation servers are not fully compatible with the HP ProLiant
ML10 v2 Server.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1600MT/s or 1333MT/s. Please see Memory Population Table or the Online Memory Configuration Tool
at: http://www.hp.com/go/ddr3memory-configurator.
HP Ethernet 1Gb 2-port 332i Adapter
Expansion Technology
Slot #
c04567802 – DA – 15220 North America — Version 1 — March 30, 2015
http://www.hp.com/go/ilo
HP SmartMemory
DDR3 Unbuffered (UDIMM)
4
32GB (4 x 8GB UDIMM)
Bus Width*
HP ProLiant ML10 v2 Server
Connector Form Factor
Width
Notes
Page 3