HP ProLiant ML10 v2 Quickspecs page 23

QuickSpecs
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
HP SmartMemory
New HP SmartMemory now provides additional protection for your servers. With HP Authentication it can verify that you have true
HP Qualified Memory in your HP ProLiant Gen8 server.
DDR3 memory population guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
http://www.hp.com/go/ddr3memory-configurator
General Guidelines:

The HP ProLiant ML10 v2 Server has four memory slots

There are two channels per server with two DIMM slots per channel

Memory channel 1 consists of the two (2) DIMMs that are closest to the processor

Memory channel 2 consists of the two (2) DIMMs that are furthest from the processor

Different types of processors have different types of memory support.

Support for single/dual-rank 1333/1600 MT/s ECC UDIMM (unbuffered DIMMS)

The server supports up to 32GB (4 x 8-GB) for Unbuffered DIMMs

No support for LRDIMMs; RDIMMs; Non-ECC UDIMMs

Do not install DIMMs if the processor is not installed

Populate DIMMs from heaviest load (double-rank) to lightest load (single-rank)

Non-ECC DIMMs are not supported

Always use HP qualified DIMMs
ML10 v2 Supported Memory Bandwidth and Capacity
DIMM Type
DIMM Rank
DIMM Capacity
DIMM Native
Unbuffered with ECC DIMMs (UDIMMs)
4GB
1333
c04567802 – DA – 15220 North America — Version 1 — March 30, 2015
HP ProLiant ML10 v2 Server
Dual Rank (2R)
4GB 4GB 8GB
1600 1600 1333
8GB 8GB
1600 1600
Page 23