Table of Contents
Advertisement
When you release the switch trigger, the tool turns off.
!
Do not let go of grinder until it has stopped running.
!
The wheel continues to rotate after the tool is switched off.
9
OPERATON MODES
Grinding
9.1
Move the grinder gently along the item. Give the grinder time to work. It is rarely
necessary to press the disc hard against the surface to be worked. Sparks can
occur in the motor compartment during use. This is normal and does not mean
the grinder is defective. Switch off the grinder after use.
10 FLANGE ARRANGEMENTS WHEN USING GRINDING
WHEELS
10.1
Flange arrangements when using a depressed centre or straight
grinding wheel
1 Clamping flange
Copyright © 2014
Original Instruction Manual
Hold the handle (3) and auxiliary handle (6)
firmly and switch on. Avoid blocking the
ventilation slots with your hand, as this may
cause the grinder to overheat. Let the disc reach
full speed. Apply the grinder to the item.
Maximum effect is achieved when the grinder is
held at an angle of 15-30°in relation to the item.
2 Flange nut
P a g e
www.Ford-tools.com
| 16
EN
Advertisement
Table of Contents
