Hyco powerflow series Installation And Operating Instructions

17. USER INSTRUCTIONS

This water heater will store water at a temperature selected via the thermostat on the front of the heater.
To set the temperature turn the control clockwise to increase the temperature and anti-clockwise to decrease it.
The indicator light comes on when the unit is heating.
Maximum energy effi ciency and product life is obtained avoiding very high temperature settings. The optimal temperature
setting balances these factors.
THE MAXIMUM TEMPERATURE SETTING IS ABOUT 65 DEGREES. THIS CAN BE EXCESSIVELY HOT FOR SOME
SITUATIONS. IN SITUATIONS WHERE VERY YOUNG CHILDREN, THE ELDERLY OR OTHER VULNERABLE
PEOPLE ARE LIKELY USERS A SUITABLE THERMOSTATIC MIXING VALVE SHOULD BE FITTED BY YOUR
INSTALLER.
If there is any risk of frost the heater should be left switched on at it lowest heat setting. If the heater is to be left unused for
long periods, it should be drained.
This unit should be maintained in accordance with the instruction in the sections 12-16.
NEVER INTERFERE WITH ANY SAFETY VALVES.
BE AWARE THAT HOT WATER DISCHARGED FROM SAFETY VALVES COULD BE VERY HOT.

18. GUARANTEE AND SERVICE POLICY

This product is guaranteed against faulty materials and manufacture for a period of one year from the date of purchase. Hyco
will in its sole discretion repair, replace or refund any faulty unit. Incorrect installation and the consequences of limescale
deposits are excluded. Consequential losses such as damage to fi ttings or labour charges are excluded from this guarantee.
7
Hyco Manufacturing Ltd
California Drive
Whitwood
Castleford
West Yorkshire
WF10 5QH
Tel: 01977 517555 Fax: 01977 517666
Web: www.hyco.co.uk
E-mail: sales@hyco.co.uk
POWERFLOW Series
Unvented Electric Storage
Water Heaters
Installation & Operating Instructions Manual
These Instructions must be left with the user after installation.
Version 3.0 June 2009