Audiovox Phase Linear UCD200 Owner's Manual page 9

Audiovox am/fm/cd receiver owner's manual ucd200
Table of Contents

Advertisement

Available languages

Available languages

UCD200
OPERATING INSTRUCTIONS
Tuning Control
7
Seek Tuning
Press the TUNE/TRACK (
) button (7a) to
tune the radio higher, or the TUNE/TRACK
(
) button (7b) to tune the radio lower. The
radio will seek the next strong station and stop.
Manual Tuning
To manually seek a specific station, first press
and hold either the up or down TUNE/TRACK
button until "MANU" appears on the display.
Press the up or down TUNE/TRACK buttons
momentarily to tune two frequency steps at a
time.
If no further tuning is performed after five
seconds, "AUTO" will appear momentarily on
the display and tuning will revert to the original
tuning mode.
Audio Mute (MUT)
8
Press the MUT button (8) to silence the volume
from the system. "MUTE" will appear on the
display panel. Press MUT again (or activate
another function) to return the volume level to
the setting that was in use before the Mute
function was activated.
FM Mono Select (MON)
9
During FM radio operation, the MON button (9)
is used to select monaural or stereo reception
of the broadcast signal. Under normal reception
conditions, the unit should be left in the stereo
mode (indicated by "ST" when tuned to an FM
stereo signal). If the signal is too noisy for
comfortable listening, press the MON button;
the "ST" indication will disappear from the
display panel and "MONO" will appear. To
return to stereo reception mode, press the
button again.
RELEASE
/
UCD200
PWR
EQ
AUDIO
SEL
AMS
10
9
Auto-Store / Pre-Set Scan
10
Tuning (AMS)
Press the AMS button (10) momentarily to scan
the 6 stations in the pre-set memory for all FM
bands. The unit will stop at each pre-set station
for 10 seconds. Press AMS again to stop
scanning and select the current frequency.
Press the AMS button for more than 2 seconds
to activate the Auto-Store Tuning feature. The
radio will automatically scan the band in use
and enter strong stations into the pre-set
memory positions for that band. Auto-Store will
erase any stored stations.
AM / FM / CD RECEIVER
1
2
3
4
5
6
SCN
RPT
RDM
7b 7a
EJECT
9
MON
DISP
TUNE
LOU
TRACK
BAND
MUT
MODE
8

Advertisement

Table of Contents
loading

Table of Contents

Save PDF