Tools Required For Assembly - ParaBody 375101 Assembly Instructions Manual

WELCOME TO THE WORLD OF
Please note:
* Thank you for purchasing the Parabody 375101 Home Gym. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your Parabody customer service representative
at (800) 328-9714.
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please
follow these rules:
1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.
Failure to do so may result in serious injury.
2. Do not allow minors or children to play on or around this equipment.
3. Exercise with care to avoid injury.
4. If unsure of proper use of equipment, call your local Parabody distributor or call the
Parabody customer service department at (800) 328-9714.
5. Consult your physician before beginning any exercise program.
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH RULER:
1/2
0
IMPORTANT NOTES

Tools Required for Assembly

* Rubber mallet or hammer
* 3/4" wrench
* 9/16" wrench
* Ratchet with 3/4" and 9/16" sockets
* 5/32" Allen wrench
* Adjustable wrench
* Tape measure
Bolt Length Ruler
1/2
1
2
S e r i o u s s t e e l !
BOLT LENGTH
1/2 1/2
3
2
1/2
4 5
1/2
6