Using The Multi-Picture Function; Pip Position - JVC PD-Z35DV4 Service Manual

To cancel the FREEZE function:
Press the f button, the 6
p buttons or the number buttons.
• The FREEZE function does not work
while a sub-picture is displayed.
• The still picture cannot be output from
the TV.
• The FREEZE function does not work
for picture of PC signal.
Using the MULTI-PICTURE
function
1 Set the PIP/TV/DVD switch to the

PIP position

When using the MULTI-PICTURE
function, set the PIP/TV/DVD switch to
the PIP position.
2 Press the X button
The MULTI-PICTURE menu appears.
1 2
D0101
3 Press the 5 buttons to choose
the number of screens and then
press the a button
Choose to return to one screen.
1
D0102
Choose to change to 2-pictures multi.
2
D0103
Choose to change to 12-pictures multi.
12
D0104
2-pictures multi:
Main-
picture
D0056
With 1125i and 750p signals, the screen is
split into two as shown below.
Main-
picture
D1056
12
Sub-
picture
Sub-
picture
Remote control buttons and functions
12-pictures multi:
D0058
• When set to 2-pictures multi, you can
view a TV picture and a picture from
an external device. You cannot view a
TV picture on more than one screen at
the same time.
• When 12-pictures multi is set, pictures
from external devices are not
displayed.
• When set to 2-pictures multi, the main-
picture can be changed by pressing the
6 p buttons. The sub-
picture screen can be changed by
pressing the 6 buttons.
When set to 12-pictures multi and
there are more than 12 pictures, the
next or previous 12 screens can be
displayed by pressing the
6 p buttons.
• When set to 2-pictures multi, the main-
picture sound from the TV speaker can
be changed to the sub-picture sound by
pressing the c button when the PIP/
TV/DVD switch is set to the PIP
position. (The speaker mark moves
from the main-picture to the sub-
picture.)
The sound changes to the main-picture
sound if the c button is pressed again.
When the headphones are connected,
you can listen to the sound from the
side at which the speaker mark is
displayed. No sound comes from the
TV speaker.
• A picture of VIDEO-1 or VIDEO-3
cannot be displayed as the sub-picture.
• The MULTI-PICTURE function does
not work for a PC signal.
• When set to 12-pictures multi, press
the 7 buttons to choose the
screen you want to view and the press
the a button to display that picture
on the whole screen.
Still
pictures
Moving
picture
17