Language; Video-1 Setting/Video-3 Setting; Ai Volume - JVC PD-Z35DV4 Service Manual

LANGUAGE

The LANGUAGE setting which was
performed in the "Initial settings (Setup
tour)" (page 9) can be changed.
1 Choose LANGUAGE, then press
the a or 3 button
A sub-menu of the LANGUAGE function
appears.
LANGUAGE
D1002-EN
2 Press the 6 buttons to choose a
language. Then press the a
button
VIDEO-1 SETTING/VIDEO-3
SETTING
Set the VIDEO-1 SETTING or VIDEO-3
SETTING correctly according to the video
signal input from the external device
connected to the VIDEO-1 or VIDEO-3
terminal. If this setting is incorrect, images
will not be displayed.
VIDEO:
If a normal video signal (composite video
signal) is input.
COMPONENT:
If a Component video signal (Y, Cb/Pb, Cr/
Pr signals) is input.
• For detailed connecting methods, see
"Additional preparation" on page 42. This
Television is compatible with the 1125i,
625p or 525p video signal only when the
component video signal is input.
• When the input signal is 1125i, 625p or
525p, each signal type is displayed at the
upper right side on the TV screen by
setting the input to VIDEO-1 or VIDEO-3.

AI VOLUME

You can prevent the sudden increase or
decrease of sound that occurs when changing
the channel to another channel or switching
the VIDEO mode to another VIDEO mode.
ON:
This function is turned on.
OFF:
This function is turned off.
• The AI VOLUME function may not
operate as expected if the sound input
level from a broadcast station (or video
software) is extremely low.
• When the Video or the DVD is used, it is
recommended to select OFF to get more
dynamic sound.
SET UP menu
39