Disassembly - JVC PD-Z35DV4 Service Manual

3.1 DISASSEMBLY PROCEDURE [PD-Z42DV4, PD-Z42DV4/S]
CAUTION:
•
When exchanging parts etc. with the front side (PDP side)
facing down, please place a protection sheet below before
starting, so as to prevent scratches on the front side.
3.1.1 REMOVING THE REAR COVER (Fig.1)
(1) Remove the power cord.
(2) Remove the 15 screws [A], the 4 screws [B] and the 8
screws [C], and remove the REAR COVER.
A (x11)
B
(x2)
D (x7)
TOP
(x6) E
CHASSIS
SHIELD
COVER
SECTION 3

DISASSEMBLY

3.1.2 REMOVING THE TERMINAL COVER AND CENTER COVER
(Fig.1)
•
Remove the REAR COVER.
(1) Remove the 7 screws [D], and remove the CHASSIS
SHIELD COVER.
(2) Remove the 6 screws [E], and remove the CENTER
COVER.
(3) Disconnect the COAXIAL CABLE.
(4) Remove the 6 screws [F], the 12 screws [G], the 1 screw
[H], and the 1 connector [I], and remove the TERMINAL
COVER.
A
(x4)
C (x8)
REAR COVER
CENTER COVER
Fig. 1
B (x2)
(x2)
F
COAXIAL
CABLE
G
(x12)
I
F
(x2)
F
(No.YA101) 1-11
TERMINAL
COVER
I
H
(x2)