Table of Contents
Advertisement
3/8 X 7-1/2" 51
32
FIGURE 7
STEP 7
•
Loosely assemble two 4-1/2" PULLEYS (18) to the PRESS ARM (3) using two 3/8 X 7-1/2" BOLTS (51), four 3/8" WASHERS
(38), four 3/8 X 1" SPACERS (32), and two 3/8" LOW HEIGHT LOCK NUTS (43) as shown in FIGURE 7. Once both PULLEYS
are installed, you may securely tighten these two connections.
• Securely tighten the two SET SCREWS (50) and insert two 2" SQ. END CAPS (56) into open ends of the PRESS ARM (3) as shown
in FIGURE 7.
38
18
3
56
50
38
43 LOW
HEIGHT
8
Hide quick links:
Advertisement
Table of Contents
