Leds - Hitron CGNV4 User Manual

Table 2: Hardware Connections
CABLE
POWER
1.3

LEDs

This section describes the CGNV4's LEDs (lights).
18 18
Version 1.1, 02/2014. Copyright
Version 1.1, 02/2014. Copyright
Hitron CGNV4 User's Guide
Use this to connect to the Internet via an F-type RF
cable.
Use the POWER port to connect to the 12v/2A power
adapter that came with your CGNV4. Use the POWER
switch to turn the CGNV4 on or off.

NEVER use another power adapter with your
CGNV4. Doing so could harm your CGNV4.
Figure 3: Power Adaptor
2012 Hitron Technologies
2014 Hitron Technologies