Table 25:
The Wireless: WiFi Site Survey Screen
WPS
Close
4.4.2
The Wireless Clients Screen
Use this screen to view information about the wireless clients connected to the
CGNV4's wireless network.
Click Wireless > Advanced, then click the Wireless Clients button. The following
screen displays.
Figure 26:
The Wireless: Wireless Clients Screen
77
77
Version 1.1, 02/2014. Copyright
Version 1.1, 02/2014. Copyright
Hitron CGNV4 User's Guide
This field displays whether the target network is using
WiFi Protected Setup (WPS) or not. If the target network
is using WPS, this field displays whether it is using PIN
mode, or Push-Button Configuration (PBC) mode.
If the target network is not using WPS, NO displays.
If the target network is using WPS, and allows
wireless devices to connect using the PIN mode, PIN
displays.
If the target network is using WPS, and allows
wireless devices to connect using the push-button
mode, PBC displays.
NOTE:
See
WPS
on page
WPS, and the difference between PIN and PBC
modes.
Click this to close the lightbox.
63
for more information on
2012 Hitron Technologies
2014 Hitron Technologies