Pptp - D-Link DIR-803 User Manual

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol) if your ISP (Internet Service Provider) uses a PPTP connection. Your ISP will provide you with a
username and password.
My Internet Select PPTP (Username/Password) from the drop-down menu.
Connection is:
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
PPTP IP Address: Enter the IP Address (Static PPTP only).
PPTP Subnet Enter the Subnet Mask (Static PPTP only).
Mask:
PPTP Gateway IP Enter the Gateway IP Address provided by your ISP.
Address:
PPTP Server IP Enter the Server IP Address provided by your ISP (optional).
Address:
Enter your PPTP Username.
Username:
Enter your PPTP Password and then retype the password in the next
Password:
box.
Reconnect Mode: Select either Always-on, On-Demand, or Manual.
Maximum Idle Enter a Maximum Idle Time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Time: Auto-reconnect.
Enter the Primary and Secondary DNS Server Addresses. The DNS server information will be supplied by your ISP.
DNS Servers:
D-Link DIR-803 User Manual
Internet Setup

PPTP

25