Table of Contents
Advertisement
LOG SET
Unpack and inspect log set. There should be a total of 6 logs. Gas and
vent connections should be made before installing log set. All logs are
numbered on the underside for their order of assembly.
Position the logs as indicated by pictures below. Allow for space
between rear log (log #1) and left and right twig (logs #5 and #6) for
best results.
Handle logs carefully as they are very fragile.
Note: Improper placement of logs may cause soot-
ing on internal parts and glass.
Step 1
Rear Log Placement (log #1)
f i r e - p a r t s . c o m
Step 2
Left Log Placement (log #2)
Step 6
Right Twig Placement (log #6)
1
5
2
4
6
3
EMBERS
Step 3
Right Log Placement (log #3)
Step 4
Middle Twig Placement (log #4)
Step 5
Left Twig Placement (log #5)
GLOWING EMBERS
Place 9 to 10 glowing embers randomly on the front
burner area as shown in step 6. This will produce the
best results.
Note: Only use embers supplied with this appliance.
Use of any other materials or incorrectly placed em-
bers may cause an incorrect flame pattern, sooting
and/or delayed ignition.
17
Hide quick links:
Advertisement
Table of Contents
