Installing Amd Athlon64 Cpu Cooler Set - MSI MS-7135 Manual

MS-7135 ATX Mainboard

Installing AMD Athlon64 CPU Cooler Set

W hen you are installing the CPU, make sure the CPU has a heat sink
and a cooling fan attached on the top to prevent overheating. If you do not
have the heat sink and cooling fan, contact your dealer to purchase and install
them before turning on the computer.
MSI Reminds You...
Mainboard photos shown in this section are for demonstration of the
cooler installation for Socket 754 CPUs only. The appearance of
your mainboard may vary depending on the model you purchase.
1. Detach the shield off the
backplate's paster.
2. Turn over the mainboard, and install
the backplate to the proper position.
E-8
3. Turn over the mainboard again, and
place the mainboard on the flat
surface. Locate the two screw
holes of the mainboard.
4. Align the retention mechanism and
the backplate.
Fix the retention mechanism and
the backplate with two screws.
retention mechanism