JVC UX-H10 Service Manual page 8

3.1.3 Removing the CD mechanism assembly and the Switch board
(See Fig.8 ~ 10)
• Prior to performing the following procedure, remove the front
panel assembly and the main board.
(1) Cut off the four bands setting the wires.
(2) Disconnect the wire from connector on the CD open switch
and CN705 on the CD mechanism board.
(3) Remove the two screws F on the front panel assembly.
(4) Release the joint d of the CD mechanism assembly.
(5) Remove the five screws G attaching the switch board to the
CD mechanism assembly.
1-8 (No.MB066)
Open switch
Front panel
Band
F
assembly
Band
F
Fig.8
Joint d
Front panel assembly
Fig.9
G
G
Fig.10
connecter CD mechanism
assembly
CN705
CD mechanism
assembly
Front panel
assembly
Switch board
CD mechanism
assembly