Front Brake Disc - VESPA 664787 Service Station Manual

Braking system
Front brake calliper
Removal
- Remove the front wheel.
- Undo the two fixing screws to the shock absorber
- calliper support.
N.B.
SHOULD IT BE NECESSARY TO REPLACE THE CALLIP-
ER, FIRST LOOSEN THE FITTING CONNECTING THE PIPE
TO THE BRAKE CALLIPER.
Refitting
To fit, follow the removal steps but in reverse order; be careful to tighten to the prescribed torques.
N.B.
ONCE REFITTING IS FINISHED, BLEED THE SYSTEM.
Locking torques (N*m)
Screw tightening calliper to the support 20 ÷ 25 Brake pipe connection 20 to 25 N•m

Front brake disc

Removal
- Remove the front wheel
- Remove the front brake calliper
- Remove the hub and the disc operating on the
wheel axle nut
- Adequately support the hub with the disc and op-
erating on the five screws shown in the photo-
graph, remove the brake disc
BRAK SYS - 118
Vespa S 50 2T