Operating The Opener Safely - EDLUND 610 Operating Instructions Manual

Operating the Opener Safely

THIS IS A POWERFUL MACHINE. YOU MUST OPERATE THE OPENER SAFELY. THIS MACHINE CAN CUT
AND SEVER PARTS OF YOUR BODY IF THEY BECOME CAUGHT BETWEEN THE CROWN PUNCH/(MAGNET
ASSEMBLY, MODEL 610M) AND THE CAN BEING OPENED. ALWAYS TAKE THE FOLLOWING
PRECAUTIONS WHEN USING THIS OPENER:
DO NOT ALLOW ANY PERSON NEAR THE CROWN PUNCH WHILE THE MACHINE IS BEING OPERATED
THE FAST, HIGH FORCES OF THE AIR CYLINDER(S) OF THE CROWN PUNCH CAN CAUSE SERIOUS
INJURIES. THE LEXAN SPLASH GUARDS MUST BE IN PLACE WHEN OPERATING THE MACHINE. ONLY
ONE PERSON SHOULD OPERATE THE CROWN PUNCH MACHINE, USING ONE HAND TO OPERATE
EACH GREEN BUTTON TO INSURE THE OPERATOR'S HANDS ARE CLEAR OF THE CROWN PUNCH
AREA. THE SAME PERSON OPERATING THE CROWN PUNCH MACHINE SHOULD BE THE
INDIVIDUAL LOADING AND REMOVING CANS.
ALWAYS DISCONNECT THE AIR LINE WHEN CLEANING, INSTALLING OR REMOVING TOOLING,
REPAIRING OR ADJUSTING THE MACHINE.
INSPECT THE CROWN PUNCH TOOLING DAILY FOR DENTS, DEFORMITIES, BROKEN WELDS, NICKS,
BURRS OR BENT TEETH.
INSPECT THE CROWN PUNCH MACHINE DAILY BEFORE AND AFTER USE OR WHEN MAKING
ADJUSTMENTS FOR THE FOLLOWING:
1) INSPECT FOR LOOSE HARDWARE.
2) INSPECT THE KNOCK OUT PINS FOR STRAIGHTNESS AND ALIGNMENT TO THE CLEARENCE
HOLES IN THE BACK PLATE OF THE CROWN PUNCH. MAKE SURE THE HARDWARE IS TIGHT.
3) INSURE ALL COVERS AND GUARDS ARE IN PLACE.
4) THE GUARD RING MOUNTING HARDWARE MUST BE TIGHTENED BEFORE OPERATION.
5) INSURE THE CROWN PUNCH MACHINE IS SANITIZED BEFORE OPERATION.
DO NOT, UNDER ANY CONDITIONS, REMOVE, BEND, CUT, FIT, WELD, OR OTHERWISE ALTER
STANDARD PARTS ON THE EDLUND CROWN PUNCH CAN OPENER. MODIFICATIONS TO YOUR
MACHINE COULD CAUSE PERSONAL INJURIES AND WILL VOID YOUR WARRANTY.
DO NOT OPERATE THE MACHINE WHEN UNDER THE INFLUENCE OF ALCOHOL, DRUGS, OR
MEDICATION.
Edlund Company CROWN PUNCH CAN OPENER, Models 610M and 610
4