Beko WSA 29000 User Manual page 13

Show-window refrigerator
Hide thumbs Also See for WSA 29000:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
GB
9. Clean the outside part of the refrigerating
circuit (compressor, condenser, connection,
tubes) by a soft brush or by the vacuum-
cleaner. During this operation, please take
care not to distort the tubes or to remove the
cables.
10. When you finish the cleaning arrange the
accessories at their place and connect the
appliance to the mains.
Trouble-shooting guide
Appliance does not work
 There is an energy cut-off.
 The plug of the supply cord is not well
inserted in the socket.
 The fuse is blown.
 The thermostats is on position Stop (O).
The appliance does not cool
 There was an energy cut-off for a longer
period of time.
 Fresh food was introduced to be frozen.
 The appliance was not placed correctly.
 The appliance is too near of a heat source.
 The thermostat button is not on the correct
position.
 Ambient temperature is too high.
The symbol
treated as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling
of this product, please contact your local city office, you household waste disposal service
or the shop where you purchased the product.
on the product or on packaging indicates that this product may not be
The inside lighting does not work when the
compressor is running
 The lamp is blown. Unplug the appliance,
take out the lamp and replace it with another
and assemble.
 The switch is on off position or aut of order.
 The switch is not acted.
The appliance is too noisy
 The appliance was not installed properly.
 The back pipes are touching or vibrating.
There is a contact between the bottles or
other vessels inside.
There is water on the inside of the cabinet
linear.
 The water drainage channel is clogged.
If you followed the above-mentioned
information and did not succeed to find the
failure, please contact the Service.
Warning!
Do not attempt at any time to repair the
appliance or its electric components yourself.
Any repair done by an unskilled person is
dangerous for the user and can lead to
warranty loss.
5
Instruction for use

Advertisement

Table of Contents
loading

Table of Contents