Maintenance; Regular Checks To Be Carried Out By Owner/Operator; Maintenance To Be Performed By Manufacturer - KLS Martin group marLED V10 Instructions For Use Manual

10

Maintenance

NOTICE
Use qualified personnel!
All maintenance work must be carried out by a hospital technician (or comparably trained
personnel).
WARNING
Risk of infection!
To prevent infections during maintenance work, make sure that such work is carried out only
on lights (and equipment) that have previously been cleaned and disinfected!
10.1

Regular Checks to Be Carried out by Owner/Operator

All lights must be checked for proper functioning and operational safety at regular intervals,
including a visual inspection for function-impairing mechanical damage:
• Function: Perform functional check acc. to Operating Instructions, with due regard to the
instructions provided in the user manual of the spring arm manufacturer.
Malfunction indicator on sensoTouch control panel of light head
•
Defective paint work (poses a danger for open wounds)
•
Fissures/cracks in plastic parts (sharp edges)
•
Loose parts
•
Proper functioning and ease of movement of rotary joints
•
To prevent injury or damage, contact the Martin Service Center immediately if damage or
malfunction is detected.
If the light is not functionally reliable or safe to operate, mark it as "out of order" and withdraw
it from service. A technical check is required in any such case.
10.2

Maintenance to Be Performed by Manufacturer

Every 24 months, a comprehensive safety check (SC) must be carried out by a person
specially authorized by the manufacturer to perform such work in compliance with the
respective national standard. Please also see section 14 "Safety Checks (SC)", page 37.
32
Instructions for Use
Operating Lights marLED
®
V10/V16
V. 1.3