Ricoh M116 Service Manual page 86

Service Program Mode
Engine Maintenance
Amount
Vert.T1.Thick
Vert.T1.Thin
Vert.BP.Plain
Vert.BP.Thick
Vert.BP.Thin
Vert.T2.Plain
Vert.T2. Thick
Vert.T2.Thin
Vert.Dup.Plain
Vert.Dup.Thick
Vert Dup.Thin
Plain Paper
Thick Paper 1
Thick Paper 2
Fuse Unit
Temp
Standby
Low Power
Fuse Unit
Thin Paper
Temp
M116/M117
registration roller for each tray and paper type.
[-8 to 8 / 0 (Default) / 1 mm/step]
Adjusts the amount of paper buckle at the
registration roller for each tray and paper type.
[-8 to 8 / -2 (Default) / 1 mm/step]
Adjusts the amount of paper buckle at the
registration roller for each tray and paper type.
[-8 to 8 / 0 (Default) / 1 mm/step]
Adjusts the amount of paper buckle at the
registration roller for each tray and paper type.
[-8 to 8 / 0 (Default) / 1 mm/step]
Adjusts the amount of paper buckle at the
registration roller for each tray and paper type.
[-8 to 8 / 0 (Default) / 1 mm/step]
Adjusts the fusing temperature for plain paper.
[150 to 190 / 175 (Default) / 5°C/step]
Adjusts the fusing temperature for thick 1 paper.
[160 to 200 / 185 (Default) / 5°C /step]
Adjusts the fusing temperature for thick 2 paper.
[160 to 200 / 185 (Default) / 5°C/step]
Adjusts the fusing temperature in the standby
mode.
[120 to 175 / 155 (Default) / 1°C/step]
Adjusts the fusing temperature in the low power
mode.
[80 to 135 / 120 (Default) / 5°C/step]
Adjusts the fusing temperature for thin paper.
[140 to 165 / 150 (Default) / 5°C/step]
5-8 SM