Ricoh M116 Service Manual page 145

Message
Misfd: Stnd Tray There is a paper jam in the
paper exit area.
Replace Fusing It is time to replace the Fusing
Unit unit.
Replace Ppr. It is time to replace the paper
Feed Roller feed roller.
Replace Print
The printer is out of toner.
Cartridge
Replace soon The printer is almost out of
Print Cartridge tonner .
Replace It is time to replace the
Transfer Roller transfer roller.
Reset Tray 1 The indicated paper input tray
1 is not installed correctly, or
not installed.
Service call There is a problem with the
SCXXX printer's controller.
Set Er: Prt Cart The indicated print cartridge is
not set correctly, or not set.
The error message appears
even though the print
cartridge is set correctly.
Size Msmtch: #
The paper size setting in the
Start/JobReset
tray # (1, 2, bypass) differs
from that of actual paper size
in the tray.
SM Appendix
Causes
Remove the jammed paper.
See User Guide.
Replace the Fusing unit.
p.2-1 "Service Menu"
Replace the paper feed roller.
p.2-1 "Service Menu"
Replace the print cartridge.
See the user's guide.
Prepare a new print cartridge.
Replace the transfer roller.
p.2-1 "Service Menu"
Install the indicated paper input tray 1
correctly.
p.3-1 "Service Call Conditions"
Set the indicated print cartridge
correctly.
Using a dry cloth, carefully wipe the
interface area on the print cartridge
surface.
Load paper of the selected size in the
tray, and then press the [Stop/Start]
key to continue printing.
Press the [Job Reset] key to cancel
printing.
3-3
Error Messages
Solutions
M116/M117