Philips 55PFL5907 User Manual page 32

Befisre you begin:
You must set Home in Location. ,,J p.38
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
t Press 1_ (MENU) and use A T _11_ to select Setup, then press
OK.
_- Use A T to select Sound, then press OK.
3 Use A T _ 1_ to selectthe item you want to adjust,then press
OK.
The following sound settings can be configured. Depending on the
format of the broadcasting, some sound settings are not available.
to select the desired setting
(Personal, Standard, Vivid, Sports, Movie, Music and
Auto sound News)
When you adjust the following settings (Equalizer,
SRS TruSurround HD and AVL), Personal will be set
automatically.
Adjust the tonal quality for" each frequency.
Equalizer to adjust the each level of tonal quality
Press BACK to go back to the previous menu.
Adjust the speakers to suit your listening preference.
Balance
You can select the Audio language while yourTV is receiving the Digital
broadcasting,
Digital audio to select the languageaccording to your preference.
language (t d ffers depend ng on the program.)
You can select Main or SAP while yourTV is receiving the Analog
broadcasting that has the SAP (Second Audio Program).
It differs depending on the program.)
Main to output main audio
Alternate audio
SAP to output second audio program
When you set to Main in Alternate audio above, you can select Mono
or Stereo if the Analog broadcasting is sending the iviTS (iViultichannei
television sound).
Mono to output mono audio
Mono/Stereo
Stereo to output stereo audio
This selects sound modes for more spatial or surround sound
reproduction.
SRSTruSurround Off to set SRST?'uSurroundHD
TM
to Off
HD On to set SRST?'uSurroundHD
TM
to On
This function keeps a constant loudness differential between theTV
commercials and the programs.
Off to remove the auto volume leveling
AVL to reduce volume differences between
On
theTV commercials and the programs
You can select the Audio Output from the unit's speakers or not, If your
amplifier is HDNI link function compatible and connected by an HDNI
cable to this unit, some sound operations such as volume up can be
changed by using this unit's remote control. Make sure Master EasyLink
is setto On. ,,,,_p.39
TV speakers
Off
On
Speakers
EasyLink
not to output sound from the unit's
speakers
to output sound from the unit's speakers
to control Audio Output from your
connected EasyLink Compliant Devices
with +/- (VOLUME) by using this unit's
remote control.
You can set the digital audio output format from SPDIF/ARC.
Digital output
format
PCM
to output PCM
Multichannel
to output Multichannel
(When the audio of the content is
PCM, it will be output in PCM even if
Multichannel is selected,)
Ifa channel or Input device is too loud ortoo soft, navigate to that
channel or Input device.
Delta volume to set a negative delta to set a positive delta
volume level as per your volume level as per your
personal preferences personal preferences
• Alternate audio and Mono/Stereo are not available when you wa±chingTV programs
with a cable box or- satellite set top box connected through an I IDNll cable or-
Component / Composite Video cables.