Watching Channels From An External Device; Access The Home Menu - Philips 55PFL5907 User Manual

Watching channels from an external device
Switching Each Input Mode can easily switch with the remote control
between TV (DTV or AnalogTV) and external devices when they are
connected to the unit,
t Turn On a set-top box or the connected device.
• The picture from your set-top box or the connected device
might appear automatically on theTV screen.
If the picture does not appear
SOURCE
2
Press _ SOURCE repeatedly to select the set-top box orthe
connected device and wait a few seconds till the picture appears.
e .g.)
DTV/TV channel
@ @
• Pressing A reverses the direction of the Input modes.
Use the remote control of the set-top box or the connected device
to select channels.
Access the Home menu
t Press t_ (MENU).
• After selecting Add new devices, follow the on screen instructions to select the correct
device and connectolt
Loci< or unlock your device from the Home menu
This section describes how to lock or unlock specified device.
t Press 1_ (MENU) on the remote control.
2 Use A Y _11_ to select a device to lock or unlock,
3 Press [_ OPTIONS on the remote control.
4
Use A 'T to select Device loci< or Device unlock, then press OK.
If device lock is unlocked, Device loci< will be displayed. If device
loci< is locked, Device unlock will be displayed and _ will be
displayed at the top right of the device icons.
Enter your PIN. Change PIN ,,J p.36
Once you have set PIN, PIN input menu does not appear after
the unit isTurned on.
Enable or disable RC key forwarding from the Home
menu
This section describes how to enable or disable RC key forwarding for
a particular device.
t Press 1_ (MENU) on the remote control.
2 Use A V _11_ to select a device to enable or disable RC key
forwarding.
Press [_ OPTIONS on the remote control.
3
4
Use A V to select Enable RC key forwarding or
Disable RC key forwarding, then press OK.
• If RC key forwarding is set to off, Enable RC key forwarding
will be displayed. If RC key forwarding is set to on,
Disable RC key forwarding will be displayed and _ will be
displayed at the top left of the device icons.
• This function is available only when your devices are connected to this unit
through HDNI cables and assigned to an HDNI port (HDNI I to HDNI 4) with
Add new devices in the Home menu,
Guide to Home menu
®
®
@
(_ Watch TV
(_ NetTV
(_) Add new devices
Browse USB
(_) Browse PC
(_ Setup
: Switches back to the antenna source if
another source is selected.
;Accesses NetTV menus.
:Adds new devices to the Home menu.
;Accesses USB menus.
;Accesses DLNA menus.
;Accesses menus that allow you to
change picture, sound and otherTV
settings,