Service Position - Panasonic VDR-D100EB Service Manual

2.1.

Service Position

2.1.1. Extension Cables for Service Position
Using the following Extension Cables, place the unit as shown for check and service.
Note :
1. The LCD open/close Switch is for changing between LCD Display or EVF Display. When turning on EVF Display, place some
paper or tape, etc. on LCD open/close Switch so that this Switch stays ON.
2. To eject the DVD manually, slide the Lock lever on the Disc Cover Lock Unit for a short time.
3. Use a grounded ESD wrist strap while disassembling the Lens portion.
4. Connect the F.P.C.s to the connectors, verifying the direction of F.P.C.s as shown.
5. Use extreme care when plugging in or unplugging connectors.
Caution
Laser light striking the eye may cause your eyesight
to be lost: For safety, be sure to remove any power
supply (AC adaptor/charger, battery, etc.) from the
DVD video camera/recorder before starting work.
<CSA requirement>
CAUTION: VISIBLE LASER RADIATION DO NOT
STARE INTO THE BEAM OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS CLASS 2M
Optical pickup
5