Planet IAP-2000PS User Manual page 70

PoE Setting
Object
 Power Limit Mode:
 Power Budget:
 PoE Function:
 Priority
 Device Class:
Description
Allow to configure power limit mode for PoE PD devices connected with
IAP-2000PS.
 Port Priority: Deliver PoE power by port priority setting.
 Total Limit: Set total limit value of all the POE ports to provide power
for the PDs.
Show the total watts usage of PoE ports.
Enable or disable the PoE function of each port.
Set port priority for the POE power management
It can choose the "port priority", value is "1~4". High priority is "1".
Class 0 is the default for PDs. However, to improve power management at
the PSE, the PD may opt to provide a signature for Class 1 to 3.
The PD is classified based on power. The classification of the PD is the
-69-
User's Manual of IAP-200x Series