Planet IAP-2000PS User Manual page 37

 DHCP Type:
 802.1d Spanning
Tree:
 LLTD:
 IGMP Proxy:
 UPNP:
 Router
Advertisement:
 DNS Proxy:
DHCP Server Enable
Object
 Start IP Address:
 End IP Address:
 Subnet Mask:
 Primary DNS Server:
 Secondary DNS
Server:
 Default Gateway:
 Lease Time:
 Statically Assigned:
Click Apply to make the configuration take effect. Click Cancel to cancel the new configuration.
If you have changed the IP address of the LAN interface, you need to enter the new IP
address to log in to the Web page, and the default gateways of all the hosts in LAN must
be set to be the new IP address, for accessing the Internet.
You can select Server or Disable.
 Disable: If you select Disable, the DHCP service of LAN side is
disabled.
 Server: After selecting Server, the DHCP server is enabled on LAN
side. You can set the items as "DHCP Server Enable".
Spanning Tree Protocol. You can select Enable or Disable.
Select enable or disable the Link Layer Topology Discover function from
pull-down menu.
Select enable or disable the IGMP proxy function from pull-down menu.
Universal Plug and Play (UPNP).You can select Enable or Disable.
You can select Enable or Disable.
Select enable or disable the DNS Proxy function from pull-down menu.
Description
The first IP address that DHCP server assigns. Client with DHCP function
set will be assigned an IP address from the range.
The last IP address that DHCP server assigns.
The subnet mask of dynamic IP.
The primary DNS server address.
The secondary DNS Server address.
The default gateway that DHCP server assigns.
Lease time of the IP address.
Assign IP to the assigned MAC address. Enter the assigned MAC address
and IP in the corresponding fields.
-36-
User's Manual of IAP-200x Series