Planet IAP-2000PS User Manual page 56

WPS Progress
Object
 WPS mode:
 PIN:
WPS Status
It displays the information about WPS status.
Click Apply to make the configuration take effect.
Configuration Example: To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between
wireless adapter and Router using either Push Button Configuration (PBC) method or PIN method.
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. By Push Button Configuration (PBC)
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC) method, you can
add it to the network by PBC with the following two methods.
Step 1:
Choose PBC, and click "Apply".
Step 2:
Press and hold the WPS Button equipped on the adapter directly for 2 or 3 seconds. Or you can click
the WPS button with the same function in the configuration utility of the adapter.
Description
There are two way for you to enable WPS function:
 PBC - You can use a push button configuration (PBC) on the Wi-Fi
router.
 PIN - If there is no button, enter a 4- or 8-digit PIN code. Each STA
supporting WPS comes with a hard-coded PIN code.
If you select PIN mode, you need enter the PIN number in the field.
Figure 4-24 WPS - PBC
-55-
User's Manual of IAP-200x Series