Table of Contents
Advertisement
If there are two LAN cards or above in the same administrator PC, please choose the different
LAN card via the "Select Adapter" field.
3.
Click "Refresh" button to renew the list of the PLANET industrial devices connected in the network. The
screen is shown as follow.
4.
This utility shows all necessary information of the devices, such as MAC address, device name, firmware
version, device IP subnet address. Users can also assign new password, IP subnet address, and description
for the devices.
5.
After the setup is completed, click "Update Device", "Update Multi" or "Update All" button to take effect.
The meaning of the 3 buttons above are shown as below:
Update Device: update the current setting on one single device.
Update Multi: choose the multi-devices for updating the current setting.
Figure 3-5 PLANET Smart Discovery Utility Snapshot
Figure 3-6 PLANET Smart Discovery Utility Screen
-24-
User's Manual of IAP-200x Series
Hide quick links:
Advertisement
Table of Contents
