Table of Contents
Advertisement
file:///C|/Documents%20and%20Settings/Administrator/Plocha/PANASONIC%20SA-PM27E/s0505000000.htm
5.5 Displaying Self-Diagnostic Results
TOP PREVIOUS NEXT
<Cassette Deck Section> (H01, H02, H03, F01, F02)
1. Enter the self-diagnostic mode, following the instructions described in [5.2. Entering Self-
Diagnostic Mode].
2. Insert a normal-positioned music tape with erase prevention niches on both Sides A and B. Press
[TAPE
] button to activate the TPS operation so that the tape automatically stopsat an interval
between music selections.
3. Press [ /CLEAR] and [TAPE
] buttons together on the remote controller. (Recording does not start.)
4. Then, insert a Cr02-positioned blank cassette tape with an erase prevention niche of Side A or B
set to the left side.
5. Press [
/FF/
] button. The tape will be forwarded and automatically stop after two seconds.
6. Remove the cassette tape, and set the other side.
7. Press [
/REW/
] button. The tape will be rewound and automatically stops after two seconds.
8. Press [
/-DEMO] button on the unit.
file:///C|/Documents%20and%20Settings/Administrator/Plocha/PANASONIC%20SA-PM27E/s0505000000.htm (1 of 3) [14.6.2003 18:28:08]
Hide quick links:
Advertisement
Table of Contents
