Specifications - Mitsubishi MT160 Repair Manual

CLUTCH SYSTEM
Possible cause
Remedy
Excessive wobbling of disc
Replace if wobbling exceeds 1 mm (0.03 in.).
Corroded disc splines due to neglected
Remove rust and coat it with grease.
lubrication
Burnt release bearing
Replace bearing.
Too little play in release bearing Adjust.
Type
Dry single disc plate diaphragm spring type
Facing material Wire-reinforced special woven fabric
Dimension of clutch disc
184 X 127 X 7.8 mm (7.2 X 5.0 X 0.3 in.)
(OD X
ID
X thickness)
Static transmission torque
11.0 kg-m (79.7 ft-lb)
Release bearing Non-lubrication type
Operation
Foot operating system
Clutch disc depressing pressure
195 ± 20 kg (430 ± 441b)
Diaphragm spring max. operating length 7 mm (0.28 in.) max.
Tapering finger height (when new)
31.0 ± 1 mm (1.22 ± 0.04 in.)
Clutch pedal free play 20
~
30 mm (0.
79~
1.18 in.).
:m
n.).
3-17