Threading The Machine (Needle Thread) - JUKI TL-2200QVP Mini Instruction Manual

Threading the machine
注意
CAUTION:
意
Thread
take-up
7
6
8
8
Turn OFF the power switch when threading or passing thread.
* To pass the thread though thread tension dial 3 , firstly raise the presser
foot lifting lever and provide a space between the tension disks.
* Bring the thread take-up 7 to the upper end of its stroke. Then, pass
the thread through it.
1
Pass the thread
1
through the thread
guide 1 .
When using a thread
such as nylon thread
which easily slips out of
the thread path, thread
the machine head as
illustrated in the circled
figure.
2
Thread the machine
head in numerical
order, 2 to 8 .
2
4
3
Sub-tension knob
・ Pass the thread through the
space between the two ten-
sion disks.
・ The standard thread tension
is achieved when the end
face of the screw at the cen-
ter of the knob is flush with
the end face of the knob.
Pass the thread through
the clearance between the
Thread tension
two thread tension disks.
disk
3
Pass the thread
through the thread
guides 9 and !0 .
15