Operation; Switching On Or Off Your Wine Cooler; Adjusting The Upper And Lower Zone Temperature; Changing Between Fahrenheit And Celsius - Sandstrom SIWC46B15E Instruction Manual

Operation

Switching On or Off Your Wine Cooler

Press and hold
GB

Adjusting the Upper and Lower Zone Temperature

The temperature of the upper zone and lower zone needs to be set individually. Press
the display will show the default temperature setting.
• Press again, the upper zone display will flash. Press
• Press again, the lower zone display will flash. Press

Changing between Fahrenheit and Celsius

Press and hold

Switching On or Off the Interior Light

Press to switch on or off the interior light.
When you use the wine cooler for the first time or restart the wine cooler after having been shut off for a
long time, there could be a few degrees variance between the temperature you select and the one indicated
on the display. This is normal and is due to the length of the activation time. Once the wine cooler is running
for a few hours everything will be back to normal.
If you are concerned that the temperature display of wine
cooler is not correct and wish to check the temperature you
will need a special fridge/freezer thermometer. You may also
need a hygrometer to check the humidity of your wine cooler.
These are available from most supermarkets and hardware
shops.
Place the thermometer and hygrometer on the middle shelf of
the wine cooler, where it can be read easily. Leave overnight,
compare the temperature of the thermometer and the display
in the wine cooler. The humidity in the wine cooler should be
between 50%-80% RH depending on the type of wine.
18
and to switch on or off the Wine Cooler.
and to change the temperature unit.
/ to adjust the temperature.
/ to adjust the temperature.
once,