Cleaning Before Use; Before Using Your Unit - Sandstrom SIWC46B15E Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

INSTALLATION
6. Check that the door is aligned horizontally
and vertically and that the seals are closed
on all sides before finally tightening the
lower hinge.
GB

Cleaning Before Use

Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm
water using a 'wrung-out' sponge or cloth. Wipe completely dry before replacing the shelves
and bottle rack. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time to settle.

Before Using Your Unit

Before placing any wine in the unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be
overfilled.
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents