Installing The Door Handle; Reversing The Door Swing - Sandstrom SIWC46B15E Instruction Manual

INSTALLATION

Installing the Door Handle

GB

Reversing the Door Swing

Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• Adjust the two levelling feet to their highest position.
• To take the door off it is necessary to tilt the unit backwards. You should rest the unit on something
solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
1. Open the door and remove the two screws
under the right bottom corner of the door.
Remove the lower right hinge. Be careful to
support the door with both hands to prevent
it from dropping after removing the screws.
14