Intended Use; Qualification Of Personnel - JUMO mTRON T Operating Manual

1 Introduction
1.2.3

Intended use

The measuring, control, and automation system is intended for use in an industrial environ-
ment, as specified in the technical data of the individual modules of the system. Use for any
other purpose is considered contrary to the intended use.
The modules have been manufactured in compliance with applicable standards and guidelines
as well as the applicable safety regulations. Nevertheless, personal injury or material damage
may occur in the event of improper use.
To avoid risks, the modules may only be used:
• for the intended use
• when in good order and condition
• when taking into account the technical documentation provided
Even if a module is used correctly and according to the intended use, it may still pose applica-
tion-related risks, for example as the result of missing safety devices or incorrect settings.
To avoid incorrect settings, this manual contains relevant safety information and warnings.
These must be complied with.
1.2.4

Qualification of personnel

This document contains the information required to ensure that the measuring, control, and au-
tomation system described is used as intended.
It is intended for technically qualified personnel who have received special training and have
the appropriate knowledge in the field of automation technology (measurement and control
technology).
Understanding and technically correct observance of the safety information and warnings con-
tained in the supplied technical documentation are prerequisites for safe startup as well as
safety during operation. Only qualified individuals have the required technical knowledge to in-
terpret and put into practice the safety information and warnings used in this document in any
given situation.
8