Table of Contents
Advertisement
EN
3 / USING YOUR APPLIANCE
DELAYED STOP
•
At the end of cooking, you can use the
that suction continues for a further 10 minutes at the selected speed.
indicator is illuminated.
To cancel the delayed stop, press the same button and the delay function will be deactivated.
•
LIGHT
Press the
button briefly to switch the hood's halogen light on or off.
Pressing and holding the
EOLYSE FUNCTION (depending on model)
•
A short press of the
The
button is lit and the
At the end of this time, the hood stops on its own. To stop the function, press
Programming the Eolyse function
A long press on the
The
button flashes alternately with the
Each short press on the
maximum of 9 hours) and after 9, this display goes back to 1. The hood will run silently at a
reduced speed for the selected time. The
number of successive flashes is the number of hours selected).
Programming is confirmed automatically after 25 seconds or by a short press on
button flashes alternately with the
Programming is confirmed by pressing the
button to turn the hood off. This function will ensure
button will change the intensity.
button starts the hood running silently at a reduced speed for one hour.
indicator flashes.
button activates programming.
button increases the eolysis time by one hour (from 1 hour to a
button).
button, indicating the start of programming.
button flashes alternately with the
button; press it a second time to cancel.
52
flashes and the power
once more.
button (the
. (The
Advertisement
Table of Contents
