Sb750P - EAW KF755 Series Owner's Manual

• Remove the 8 woofer mounting screws with a 3/16 allen wrench. Do not discard
the mounting hardware.
• Lift the woofer from the cabinet only enough to access and disconnect the blue
lead+ from the red pushbutton terminal, and the black lead– from the black push-
button terminal. These terminals are located behind the woofer.
• Remove the woofer and repeat the above steps for the second woofer.
6.3.7.3 Reinstallation of the SB750F Components:
To reinstall any of the components mentioned in this section, reverse the appropriate
disassembly instruction.
6. 3.8 SB750P LOUDSPEAKER
PROCEDURE:
6.3.8.1 Accessing the Woofer Chamber:
Remove the grille/grille foam assembly. Be careful handling the wire mesh; it can easily
cut into the skin.
• During removal, hold the grille/grille foam assembly in place. This prevents the
grille foam from tearing.
• Remove the 16 grille mounting screws with a phillips head screwdriver. Do not
discard the mounting hardware.
6.3.8.2 Removing the Two Woofers:
Refer to Section 6.3.7.2.
6.3.8.3 Reinstallation of the SB750P Components:
To reinstall any of the components mentioned in this section, reverse the appropriate
disassembly instruction.
16X GRILLE SCREWS #8 X 5/8"LG
PHILLPS HEAD BLACK 102102
(ONLY 10 SHOWN)
GRILLE 702432-0002
& GRILLE FOAM 712038
GLUED TOGETHER
23