Dip Switch - Panasonic AJ-HD3700B Operating Instructions Manual

DIP switch

AV microcomputer DIP switch specifications
SW6501 ON (0)
1
2
3
4
5 Normal
6 Normal
7 — —
8
SYSCON microcomputer DIP switch specifications
SW6071 ON
1 Normal
2
3
4
6 Ejected
7 ——
8 ——
History: No.6: From SYSCON Ver.0.12
SERVO microcomputer DIP switch specifications
SW2001 Purpose
1 For AT adjustments
2 For AT adjustments
3 For AT adjustments
4 For AT adjustments
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
OFF (1)
Normal Not used
Normal Not used
Normal Not used
Normal Not used
— — Keep this switch at the factory setting.
— — Keep this switch at the factory setting.
Normal Keep this switch at the factory setting.
Normal Keep this switch at the factory setting.
OFF
Keep it at the factory setting.
Normal For test purposes.
Prohibited [This sets whether to accept or prohibit the selection of
the editing mode when the X-value adjustment master
tape (D3 recorded tape) has been loaded.]
Normal For test purposes.
Not ejected The D3 cassette holes are detected, and the cassette
is forcibly ejected automatically.
Normal For test purposes.
Normal For test purposes.
ON
When adjusting
When adjusting
When adjusting
When adjusting
– 52 –
Remarks
Remarks
The underlining indicates the factory settings.
OFF
At all other times
At all other times
At all other times
At all other times