Installing Memory Card; Turning On/Off - Prestigio PMP3084B Product Service Manual

Prestigio
（1）Connecting to PC and copy files
a. You need to connect this unit to PC before transferring files between the unit and PC.
b. Insert the MINI end of the USB cable into the USB jack of the unit and the other end into the USB port of the
PC.
c. Once the connection is successfully done, on your PC two more disk symbols will appear: one stands for the
internal memory, the other stands for memory card.
d. Double click the icon of memory card to open it, then you can either copy files from PC to the unit or from the
unit to PC.
（2）Disconnecting the unit from PC
a. Make sure that data transfer between the unit and PC has completed
b.
Drag from the top bar downwards to display the USB notification message as shown.
Click and drag downwards
c. Choose "Turn off USB Storage"
small widow that will come up tells " Stop USB Mass Storage Device Drive X, in which X refers to the current
movable disk. Click the small window with the left key, the system will ask whether or not to remove current disk
safely. Click OK to confirm.

Installing Memory Card

This device can read files directly from memory card.
To use a memory card, find the card slot at the bottom of the device and then insert the memory card into the slot
in the correct orientation. To access the files stored in the memory card, enter the Explorer mode by tapping the
Explorer icon and select the "SD Card" directory.
Note:
a. During playback of AV files on the memory card, it is recommended not to disconnect the card frequently ， so as
to prevent damage to the card or the device.
b. The interval between connection and disconnection of the card is at least 3 seconds ， i.e., do not insert the card
immediately after it is disconnected. you should wait at least 3 seconds before inserting the card into the slot
again.
c.To avoid damaging the memory card, it is suggested the card should be removed in the safe removal mode if
needed: Select "SD Card /MID Memory" in the Setup menu, then select "Remove SD card" before you finally
unplug the memory card.

Turning On/Off

To turn on the device, press and hold the Power button on the unit until you see the boot-up screen then release.
It may take a few minutes to start up the system, please wait before you proceed.
and then tap "Turn Off" to disconnect the device from computer, then a
PMP3084B/BRU
.
7