Using Your Machine - Vax S86-SF-CC Let's Get Started

Using your machine

IMPORTANT
• If you don't want to use detergent on your flooring, turn detergent dial to OFF position.
• Always test on an inconspicuous area of flooring first before using detergent.
• Don't over fill the clean water/detergent tanks or exceed the maximum amount required.
• Don't use the steamer without water in the water tank. Always top up with water in good time.
Filling water tank
Press the water tank release
buttons and pull the water
tank to remove.
Filling detergent tank
Press the release buttons
and pull the detergent
tank to remove.
Replace the detergent
tank cap and twist
clockwise to close.
Pull the tab on the water tank
cap to open.
Twist the detergent tank
cap anti-clockwise and lift
to remove.
Replace the detergent tank
back into the steamer and
push until it clicks into place.
Fill the water tank with
260ml of water, replace the
cap and push firmly to close.
Pour 50ml of Vax detergent
and 150ml of water into the
detergent tank.
Slide the water tank back into
the machine until it clicks
into place.