Replacing The Hard Water Filter; Removing Blockages - Vax S86-SF-CC Let's Get Started

IMPORTANT: Don't operate the steamer without hard water filter in place. The condition of the filter affects the performance of your
steamer, check and change filter periodically. If you live in a hard water area the filter will discolour or darken over time. Depending on
water hardness and frequency of use, the filter should be changed every 3 to 6 months (or if the filter has discoloured).

Replacing the hard water filter

Remove the water tank
to access the hard
water filter.

Removing blockages

If there is an obstruction
to the steam flow through
the machine, steam may be
released through the bleed
valve located on the side of
the handheld.
Taking care of your machine
Pull to remove the hard
water filter.
To remove the floorhead
from main body push the
floorhead release button
and lift.
New filter
(beige/cream colour).
After floorhead is removed,
using a thin object such as
a paper-clip (in the area
shown), insert to remove
the blockage.
3-6 Months
Hard water filter should
be replaced every 3 to 6
months or if discoloured.
With the pad removed
from the floorhead, insert
a small thin object such
as a paper-clip in to the
steam holes to remove
a blockage.