CAUTION: Always switch off the steamer before attaching the concentration tool and accessories.
IMPORTANT: The handheld is to be used with water only, putting detergent into the water tank can cause damage.
Always check the tools are clean and free from debris, don't use if damaged, broken or worn.
Using the handheld steamer
Lift the handheld release
button and gently pull the
handheld to release from
the steamer.
Plug into mains and twist On/Off
control dial to On.
Attaching small tools
Small tools can be attached via the concentration
tool. Twist clockwise until locked into position and
secure. Turn anti-clockwise to remove.
Remove water tank and fill
before use.
To produce steam squeeze the
trigger in short bursts. Don't hold
the trigger continuously to prevent
over-wetting.
Using your machine
When using the handheld, always attach the
concentration tool. Push the concentration tool
onto the handheld nozzle and twist clockwise
to lock into position.
To re-attach the handheld to the steamer, align
the handheld with the steamer, lift the handheld
release button and slide the handheld back into
the steamer until it clicks into place, taking care
not to trap the power cord.
After attaching your
chosen tool gently pull
to make sure it's
locked into place.