Taking Care Of Your Machine - Vax S86-SF-CC Let's Get Started

Taking care of your machine

IMPORTANT: Allow the steamer to fully cool down before performing any maintenance or troubleshooting checks. Don't leave water
or detergent in the tanks between uses, as this can effect the steamer's performance, the water/detergent tanks need to be emptied
and rinsed after each use.
IMPORTANT: Don't use bleach or fabric softener when washing the microfibre cleaning pad. Always allow the steamer to fully
cool down before removing the microfibre cleaning pad.
Emptying the water/detergent tanks
To remove the water tank
press both water tank
release buttons, and pull
to remove.
Emptying the detergent tank
Press the release buttons
and pull the detergent
tank to remove.
Removing cleaning pads
Using your foot, hold the corner
of the microfibre cleaning pad
down, lift steamer to peel away.
Pull the tab on the water Empty any excess water
tank to open. over the sink.
Twist detergent tank Empty any excess
cap anti-clockwise and detergent over the sink.
lift to remove.
Max 40°C
The microfibre pad is machine
washable (Max 40⁰C) allow
to fully dry before use.
Rinse water tank with water and
replace water tank tab, push firmly
to close before replacing back onto
the steamer.
Rinse detergent tank with water,
replace detergent tank cap and turn
clockwise to tighten. Replace the
detergent tank back onto the steamer.
Storing your steamer
Wrap the power cord around the
quick cord release hooks and insert
the plug into the plug storage socket.