Page 1
NOTE: Vax recommends that you raise the height of the brushbar when using this cleaner on lino and hard flooring. Vax cannot be held responsible for damage to these surfaces if the customer fails to take notice of this recommendation.
Page 2
Vax U91-P5 & 6 Series User Guide.qxd:UG 2/4/09 17:48 Page 2 vax.co.uk 1. Diagram U91-P5 Fig.1/1 WARNING: This cleaner has a constantly rotating brushbar 1 Handle 10 Brush bar and brushbar windows which, when left in contact with lino, 2 TurboTool™ holster...
Do not use the vacuum cleaner with a damaged cord or plug. If the supply cord or plug is IMPORTANT: Cleaning filters improves vacuum damaged, return the vacuum cleaner to a Vax performance. Authorised Service Agent or suitably qualified This vacuum cleaner is intended for household use person for examination, repair or adjustment.
Vax U91-P5 & 6 Series User Guide.qxd:UG 2/4/09 17:48 Page 4 vax.co.uk 3. How to Assemble 4. Place the upper handle onto the upright back panel (Fig.3/4). IMPORTANT: Always unplug the vacuum cleaner from the electrical outlet before assembling or removing the accessories.
Page 5
Vax U91-P5 & 6 Series User Guide.qxd:UG 2/4/09 17:48 Page 5 Vax Careline 0870 606 1248 7. Clip the TurboTool™ onto the front of the TurboTool™ properly (Fig.3/10). caddy (Fig.3/7). Fig.3/10 Fig.3/7 11. Insert the tab on the bottom of the dirt container into 8.
NOTE: Vax recommends that you raise the height of the brushbar when using this cleaner on lino and hard flooring. Vax cannot be held responsible for damage to these surfaces if the customer fails to take notice of Fig.4/4...
Page 7
Vax U91-P5 & 6 Series User Guide.qxd:UG 2/4/09 17:48 Page 7 Vax Careline 0870 606 1248 5. Accessories IMPORTANT: The vacuum cleaner must be in the upright position to raise the brushbar. The brushbar height adjust must also be at its highest position.
Page 8
Vax U91-P5 & 6 Series User Guide.qxd:UG 2/4/09 17:48 Page 8 vax.co.uk 6. Dirt Container & Filter: 4. Empty the dirt container completely (Fig.6/4). Removal and Replacement WARNING: To reduce the risk of injury from moving parts, unplug before servicing.
Vax U91-P5 & 6 Series User Guide.qxd:UG 2/4/09 17:48 Page 9 Vax Careline 0870 606 1248 7. Belt and Brush: 8. Clearing Blockages Removal and Replacement WARNING: To reduce the risk of injury from moving parts, unplug before servicing. 1. Unplug the vacuum cleaner from the mains supply. Press the handle release button and turn the vacuum cleaner 1.
Page 10
Vax U91-P5 & 6 Series User Guide.qxd:UG 2/4/09 17:48 Page 10 vax.co.uk 5. Remove the nozzle guard by removing the four (4) 3. To re-assemble, be sure that the tabs are engaged. Pivot screws. Look for any obstructions and remove brushbar if the lower housing closed.
Capacity: 4.5 litres max Saturday-Sunday 9.00am to 5.00pm Filter: HEPA antibacterial Any queries or concerns about using the Vax, call the Vax Cord length: Careline. Calls are charged at the UK national rate. Weight: 9 kg Please make a note of the serial number and model Subject to technical change without notice.
Page 12
Vax U91-P5 & 6 Series User Guide.qxd:UG 2/4/09 17:48 Page 13 Vax Careline 0870 606 1248 This page has been left intentionally blank...
Page 13
Vax U91-P5 & 6 Series User Guide.qxd:UG 2/4/09 17:48 Page 14 vax.co.uk This page has been left intentionally blank...
Page 14
Vax U91-P5 & 6 Series User Guide.qxd:UG 2/4/09 17:48 Page 15 Vax Careline 0870 606 1248 This page has been left intentionally blank...
Page 15
17:48 Page 16 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the U91-P5 & U91-P6 series bagless upright vacuum cleaners are manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive EMC: 2004/108/EC Electromagnetic Compatibility Directive Waste electrical products should not be disposed of with household waste.