Replacing The Exhaust Filter - Vax C85-AS-PH-E User Manual

Multi-cyclonic
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 18
Maintenance
Cleaning the pre-motor filter
Press the dust bin release han-
dle. The lid opens automatically.
!
!
40˚C
40˚C
MAX
MAX
If cleaning the pre-motor filter dry is not sufficient: Rinse out the filter thoroughly under running water
(max. 40 °C). Then allow it to dry for at least 24 hours at room temperature before you use it again.
24hr
24hr
TIP: It is advisable to clean the pre-motor filter (see above) every time you empty the dust bin. It is
also advisable to replace the exhaust filter (see below) every 12 months.

Replacing the exhaust filter

IMPORTANT: The exhaust filter has been designed so that it requires no maintenance. However, it
should be checked regularly. If it is damaged or deformed, it will need to be replaced with a new one.
Never wash or brush out the delicate filter fins of the exhaust filter.
Push the release down and
remove the exhaust filter
cover.
28
!
!
Pull the tab on the pre-
40˚C
40˚C
motor filter and remove
MAX
MAX
the pre-motor filter.
24hr
24 hours
24hr
Push the tab on the
exhaust filter down and
remove the filter from the
appliance.
First clean the pre-motor
filter dry.
Check the filter to make
sure it is undamaged.
!
40˚C
MAX
24hr

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents