Table of Contents
Advertisement
Cleaning and maintenance
Cleaning the pre-motor filter
IMPORTANT: For best cleaning results, the filters should be tapped over a bin every 4-6 uses to
remove dirt/debris. The pre-motor filter should be washed every 3 months (depending on the level
of use) and replaced every 9-12 months.
Ensure all filters are in place before using the machine.
Push the tab up on the lid of the dirt container and lift to open the cover.
Tap the pre-motor filter over a bin to
remove any dirt/debris.
10
40°C
MAX
Wash the filter under running water
(40˚ max). Leave for 24 hours or until
fully dry before replacing.
Pull the pre-motor filter tab and remove
the filter from the separator.
24hr
Advertisement
Table of Contents
